| Customization: | Available |
|---|---|
| Type: | Self-Starting Diesel Generator |
| Installation Method: | Fixed |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Good Quality 100kVA/80kw Open Type Cummins Diesel Genarator Set
| DIESEL GENERATOR SET | |||||
| Gensets Model | KH-80GF | ||||
| Prime Power | 80KW/100KVA | ||||
| Standby Power | 88KW/110KVA | ||||
| Rated Voltage (V) | 400 | ||||
| Rated Current (A) | 92 | ||||
| Rated Frequency (Hz) | 50 | ||||
| Rated Speed (RPM) | 1500 | ||||
| Power Factor (COS¢) | 0.8(lagging) | ||||
| ENGINE DATA | |||||
| Engine brand | Cummins | ||||
| Engine model | 6BT5.9-G2 | ||||
| Number of Cylinders | 6 | ||||
| Cylinder arrangement | L type | ||||
| Cycle | Four Stroke | ||||
| Aspiration | Turbocharged and Aftercooled | ||||
| Fuel System | Direct Injection | ||||
| Bore×Stroke (mm×mm) | 102x120 | ||||
| Displacement (Liter) | 5.9 | ||||
| Cooling System | Water Cooling | ||||
| Speed Governor | Electrical | ||||
| Compression Ratio | 17.3: 1 | ||||
| Starting Method | DC 24V electrical starting | ||||
| Fuel Consumption (100% load) | 100% | 24.2 | |||
| 75% | 18.2 | ||||
| 50% | 12.5 | ||||
| Total Coolant Capacity (Liter) | 10 | ||||
| ALTERNATOR DATA | |||||
| Alternator brand | Stamford | ||||
| Alternator model | UCI274F | ||||
| Number of Phase | 3 | ||||
| Connecting Type | 3 Phases and 4 Wires | ||||
| Number of Bearing | Single | ||||
| Protection Grade | IP23 | ||||
| Altitude | ≤1000m | ||||
| Exciter Type | Brushless, selfexciting, AVR &100% copper winding wire | ||||
| Insulation Class | H | ||||
| Telephone Influence Factor (TIF) | ≤50 | ||||
| Telephone Harmonic Factor(THF) | ≤2% | ||||
| Voltage Regulation, Steady State | 1.00% | ||||
| Transient State Voltage | ≤-15%~+20% | ||||
| 4. Specification of control Panel(with ComAp controller) | ||||||||
| The control panel is AMF control panel, with the display of voltage,current, frequency, water temperature, oil pressure. The genset with alarm of low oil pressure,high water temperature,over speed,over load protection function. | ||||||||
| The features of Deepsea controller: | ||||||||
| ComAp controller is a new generation Automatic control module for single Genset, which adopts bran-new outline configuration, focus on the requirements of customers, and perfectly improves the performance of controller. It fully meets the auto control requirements of different kinds of Genset for user or special assembly factory. |
||||||||
| The module also monitors and protects the engine, indicating operational status, fault conditions and metering on the front panel LCD and LED's. |
||||||||
| • True RMS measure of voltage and current. | ||||||||
| • Multi-Language menu. | ||||||||
| • 128 x 64 pixel LCD display. | ||||||||
| • 4 analog inputs for kinds of optional sensors that can be used for measuring oil pressure, coolant temperature, fuel level and so on; parameters can be configured by user. |
||||||||
| • More outputs of configurable auxiliary control relays. | ||||||||
| • More configurable isolated digital inputs. | ||||||||
| • Buttons on control panel are used for selecting control modes, starting and stopping the operating procedure, displaying data and modifying the parameters. LED indicators are used for indicating the operation mode of controller and the running status of Genset, and LCD displays each measuring parameter and status. |
||||||||
| • Flexible equipped with RS485, RS232 and USB, realizing remote monitor; or communicated with PC, fully realizing functions of remote signaling, telemetering and remote control, can read and set the running parameters of controller. |
||||||||
| • With GPRS-DTU or Ethernet-DTU for remote communication instead of RS485, RS232, or USB port for remote communication. |
||||||||
| • Optional CANbus, read and control the parameters for ECU engine. | ||||||||
| • All connections of the controller are by secure plug and socket, for ease and convenience to connect, move, maintain and replace the device. |
COMPANY
Kaihua was built up in 2003, with registered capital reaching 17 million USD. Its products were exported to 50 more countries. Annual output is over 2000 sets with revenue around 30 million USD in total.
100 people work here, among whom 2/3 are college educated. Engineer team consists of 15 more people with professional electric background. With a complete production line combined with advanced testing center, we ensure to produce high quality and reliable products. CE, ISO9001: 2008, ISO14001 certificates are awarded.
Kaihua aims to provide one stop service for all customers. 3 main products (ie 3~3000kva diesel generator sets, control cabinets, spare parts) total 27 types to cover customer's needs comprehensively.
Taizhou Kaihua Diesel Generator sets Co.,Ltd
Ms Maggie
Overseas Manager
Website:bestgenset88.en.made-in-china.com
If any questions,pls call me freely!
){kind=link}